Connecting a car's OBD-II (On-Board Diagnostics) system to an Arduino is a popular project for reading vehicle data
like speed, engine RPM, fuel level, and more. To make this connection work, you'll need an OBD-II to UART (Universal
Asynchronous Receiver-Transmitter) interface, and the right Arduino library to handle the communication.
Here’s how you can connect an OBD-II port to an Arduino and read data from your car:
Components Needed:
1. OBD-II to UART adapter (e.g., ELM327-based)
You can purchase an OBD-II to UART adapter (like an ELM327-based module), which interfaces with your
car’s OBD-II port and communicates with the Arduino via serial communication.
2. Arduino (e.g., Uno, Nano, or Mega)
The most common models like the Arduino Uno or Nano work well for this project.
3. Jumper wires
These are used to make connections between the Arduino and the OBD-II adapter.
4. Power supply for Arduino and the OBD-II adapter
The OBD-II adapter will be powered through the car’s OBD-II port (usually 12V), and the Arduino will
be powered separately (via USB or external power supply).
Steps to Connect:
1. Connect OBD-II Adapter to the Car
Plug the OBD-II adapter into your car’s OBD-II port. This port is usually located under the dashboard
near the driver's seat, around the area of the steering column.
2. Connect the OBD-II Adapter to Arduino
The ELM327 OBD-II adapter typically has pins for TX (Transmit), RX (Receive), and GND (Ground).
Connect:
TX (OBD-II adapter) → RX (Arduino)
RX (OBD-II adapter) → TX (Arduino)
GND (OBD-II adapter) → GND (Arduino)
Some ELM327 adapters communicate at 9600 or 115200 baud rate, so you'll need to make sure you set the
correct baud rate on your Arduino.
3. Install the Required Arduino Library
You’ll need the `OBD-II` library to communicate with the OBD-II adapter. The most common library is
called OBD2 or OBD-II.
Go to Arduino IDE > Sketch > Include Library > Manage Libraries.
Search for "OBD-II" or "OBD2" and install it.
4. Write the Code for Arduino
Here's an example sketch to communicate with the OBD-II adapter:
1#include <OBD2.h> // Include the OBD-II library
2
3OBD2 obd; // Create an OBD2 object
4
5void setup() {
6 Serial.begin(9600); // Start serial communication at 9600 baud
7 obd.begin(); // Start communication with OBD-II adapter
8
9 if (obd.isConnected()) {
10 Serial.println("OBD-II connected!");
11 } else {
12 Serial.println("OBD-II not connected.");
13 }
14}
15
16void loop() {
17 if (obd.isConnected()) {
18 // Read RPM (example of retrieving engine RPM)
19 int rpm = obd.getEngineRPM();
20 Serial.print("Engine RPM: ");
21 Serial.println(rpm);
22 delay(1000); // Wait for 1 second
23 }
24}
In this example, the Arduino will read the engine RPM and print it to the serial monitor.
Troubleshooting:
1. Ensure Proper Connections: Double-check your wiring (TX/RX and GND).
2. Check the Baud Rate: The default baud rate for ELM327 adapters is often 9600 or 115200, so make sure the baud
rate in the code matches the one used by the adapter.
3. Ensure OBD-II Adapter is Powered: The OBD-II adapter will be powered from the car, so make sure the car's
ignition is turned on.
What You Can Read from OBD-II:
Once connected, you can retrieve various data from your car, such as:
Engine RPM: Engine revolutions per minute.
Vehicle Speed: Current speed of the vehicle.
Coolant Temperature: Temperature of the engine coolant.
Throttle Position: How much the throttle is open.
Fuel Level: Current fuel level in the vehicle’s tank.
DTC (Diagnostic Trouble Codes): Error codes from the vehicle’s ECU.
You can extend the functionality by querying more PIDs (Parameter IDs) from the OBD-II standard.
OBD-II TO UART (Universal Asynchronous Receiver Transmitter Adapter) ADAPTER
An OBD-II to UART adapter (often based on the ELM327 chip) is an essential component when connecting your car’s
OBD-II port to a microcontroller like an Arduino. This adapter translates the data from the car’s OBD-II system into
a format that the Arduino can interpret via a serial connection (UART).
What is ELM327?
The ELM327 is a microcontroller used to interface with a car’s OBD-II port. It translates OBD-II protocols (which
are specific to car manufacturers) into a standardized, easy-to-use format over a serial connection. The ELM327 is
one of the most popular chips used in OBD-II scanners and adapters.
How the Adapter Works:
1. ELM327 Chip: It communicates with the OBD-II port (which provides data from the car's ECU) using specific
protocols like ISO 9141, ISO 14230 (KWP2000), ISO 15765 (CAN), and others.
2. UART Interface: The ELM327 converts this data into a serial format (UART), which can be read by an Arduino or
other microcontroller. The communication between the adapter and the Arduino uses standard TX (transmit), RX
(receive), and GND (ground) pins.
Types of ELM327-based Adapters
1. Bluetooth OBD-II Adapter
These are wireless adapters that connect to your smartphone or Arduino using Bluetooth.
Common brands: OBDLink, Veepeak, and Carista.
These typically have a 16-pin OBD-II connector, and they communicate over Bluetooth with an app or Arduino
using the Bluetooth serial protocol.
Use case: Useful for mobile projects or when you don’t want to deal with wires.
2. USB OBD-II Adapter
These adapters use USB for communication and can be used with PCs, laptops, or microcontrollers.
Examples: OBD-II USB Cable, ELM327 USB Interface.
Use case: Great for debugging or connecting to a PC for logging and monitoring.
3. Wired OBD-II to UART (Serial) Adapter
This version has a direct UART interface for Arduino and communicates over a wired connection. It doesn’t
require Bluetooth or USB ports.
Typically, this is what you would want for Arduino projects.
Example of a Wired OBD-II to UART Adapter:
This version often has a 16-pin OBD-II connector on one side and 3 wires for TX, RX, and GND on the other.
Typical Pinout:
OBD-II 16-pin side:
Pin 4: Ground (GND)
Pin 5: Ground (GND)
Pin 7: K-line (ISO 9141 and KWP2000)
Pin 10: J1850 Bus
Pin 16: Battery voltage (12V)
Others (pins 2, 3, 6, 14, etc.) are used for various protocols or CAN signals.
Serial Side (TX/RX):
TX (Transmitting): Connected to RX on Arduino.
RX (Receiving): Connected to TX on Arduino.
GND (Ground): Connected to GND on Arduino.
Example OBD-II to UART Adapter (ELM327-based) for Arduino:
You can buy a ready-made ELM327 adapter, but you might also want to look at the OBD-II UART Adapter boards based on
ELM327:
Example:
OBD-II UART Adapter based on ELM327 can be found on platforms like Amazon, eBay, or AliExpress.
These adapters usually have the following features:
16-pin OBD-II connector.
A serial interface (TX, RX, and GND pins).
Powered by the car's OBD-II port (usually 12V DC).
Pinouts of an ELM327 OBD-II UART Adapter:
TX (from ELM327) → RX (Arduino)
RX (from ELM327) → TX (Arduino)
GND (from ELM327) → GND (Arduino)
VCC (from ELM327) → 5V (Arduino)
You can find these adapters for a range of prices, but make sure you're purchasing from a reputable seller to ensure
the chip is actually an ELM327 and that it supports the protocols required for your car.
Programming the Arduino:
Once you have the ELM327-based OBD-II UART adapter, you’ll want to communicate with the OBD-II system using the
right commands and protocols.
Example of Connecting to ELM327 via Arduino:
1#include <OBD2.h> // Include the OBD-II library
2
3OBD2 obd; // Create an OBD2 object
4
5void setup() {
6 Serial.begin(9600); // Start serial communication
7 obd.begin(); // Initialize communication with ELM327
8
9 if (obd.isConnected()) {
10 Serial.println("OBD-II Connected!");
11 } else {
12 Serial.println("Failed to connect.");
13 }
14}
15
16void loop() {
17 if (obd.isConnected()) {
18 int rpm = obd.getEngineRPM(); // Get Engine RPM
19 Serial.print("Engine RPM: ");
20 Serial.println(rpm);
21 delay(1000); // Wait for a second before next reading
22 }
23}
Conclusion:
Using an OBD-II to UART adapter (ELM327-based) is an effective way to connect your car's OBD-II system to an
Arduino. These adapters handle the complex communication protocols of the car, and allow you to easily interact with
the data in your Arduino program.
Comments